Flat tyres are the biggest nightmare for drivers. Anything could have caused the puncture – A small piece of glass, a tiny nail or perhaps, some other sharp object might cause the damage to your car’s tyre. When you have problems with tyres get in touch with centres offering tyre puncture repair Abu Dhabi services.
Regardless of whether your automobile has a tubeless or regular tyre, you cannot continue driving with punctured tyres as they could potentially cause accidents and damage to the rims of your vehicle. Taking the automobile to the garage can seem like the wisest course of action in this situation.
- Find the Leak
Identifying the leak is the first step. It’s not always easy to locate the cause of puncture. Examine the tyre closely to check for any cuts or holes. Check for a hissing sound by inflating the tyre to the proper pressure level if a visual inspection is unsuccessful.
If, on the other hand, you are unable to find the puncture, combine some dish soap with water and apply the mixture to the tyre by brushing or spraying it on. Bubbles will emerge from the place that is leaking. Use tape to indicate the location.
- Loosen the Lug Nuts and Jack Up the Car
To remove the tyre, the second step is to lose the lug nuts. Either an impact wrench or a lug wrench will work for this. This must be done before jacking up the car to prevent it from spinning uncontrollably when the nuts are being removed.
The car needs to be jacked up in order to remove the wheels. One way to stop your automobile from rolling is to keep it on a level or concrete surface! To keep the car stable, use jack stands. Now, raise the side of your car that needs work by positioning your car jack at the suggested jacking spots.
- Clean the Puncture
Your reflexes will be put to the test here. To swiftly enter the T-handle rasp tool into the puncture, you must totally remove the object that created it. This will guarantee that the hole is cleaned out in addition to temporarily stopping the air leak.
The purpose of the rasp tool is to smooth out the hole so that the plug that has to be introduced in the following step may seal the puncture more effectively.
- Time to Patch Up
It’s time to prepare the T-handle insert tool while the T-handle rasp tool is still in place. The tyre plug is inserted into an insert tool that has a needle-like slot. After it is in, cover the plug with rubber cement, which is a bonding agent that keeps the plug in place.
Then swiftly insert the plug tool after removing the rasp tool. To lose as little air as possible, this step must be completed quickly, just as the last one. All you have to do is remove the insert tool after it is in; the plug will stay in the tyre and the seal should be flawless.
- Scrutinize the Seal
Using a knife or blade, trim the surplus tyre plug material so that it sits flush with the tire’s surface. Then, cover the clogged region with some water and look for bubbles.
If bubbles appear, the leak is still there and the entire procedure needs to be done again. If, however, there are none, you can proceed. For better services get help from tyre puncture repair Abu Dhabi.
Every driver has probably encountered the annoyance of a flat tyre at some point. But you can deal with punctures quickly and effectively if you have the appropriate information and are prepared.
Taking immediate and safe action is crucial. You can get in touch with a tyre repair Abu Dhabi service for more advice. By keeping this handy guide close at hand, you’ll be more prepared to handle tyre issues when driving.